Blog Feed – Page 7 – Runned by ECO Farm Canada Inc (https://www.ecofarm.ca)

Wet Trim vs Dry Trim | How to trim buds the best way?

Why do growers trim cannabis buds in the first place?

Appearance – In magazines, at the dispensary and in pictures online nearly all the buds you’ll see are completely manicured, or at least somewhat trimmed. This is the appearance we’ve come to associate with “good weed” and so untrimmed buds may look less appealing to some people.
Harshness – leaves can be more “harsh” on your throat/lungs than flowers when smoking cannabis, so trimming off extra leaf matter can improve the “smoothness” of your buds when smoking.
THC Concentration – the sugar leaves on your buds inherently have a lower concentration of THC than bud (even trichome-encrusted ones!), which means that you’re getting less THC gram-for-gram than with bud.

Wet trimming is better for:

Beginners to growing as it is easier to get it right
Avoiding mold
Prettier buds

Dry trimming is better for:

Flavor and aroma
Allowing your buds and leaves to dry out at their own pace
Shortening the cure time

Wet trimmingWhen you trim your weed wet, you do it immediately after you cut down a plant and before you dry and cure.
Pros:

With less moisture-filled foliage attached to the flowers, the dry will naturally speed up. This can be helpful in a humid climate in which you’re fighting mold problems and need to keep things moving along quickly.
While plants are still this fresh, trichomes, a.k.a. the THC-filled glands that get you high, are super sticky. Handled at this time, that stickiness helps them stay better connected to the plants, preserving them for later enjoyment.
Wet trimming is probably the easiest for novices. Before leaves dry up and curl inward, it’s easy to navigate your snips inside buds to remove full stems of leaves.

Cons:

Your flowers won’t be as full of flavor as they would be following dry trimming.

Dry TrimmingWhen you trim dry bud, you do not cut any leaves off after harvest. Instead, you let the marijuana flowers dry and cure first. Only after they have been dried and cured do you remove the excess leaves.
Pros:

Higher quality buds
No need to trim all at once

Cons：

More difficult
Slower
Higher risk of mold

THE PERFECT BALANCEWith all this in mind, here is how you can balance the methods and try to obtain the pros of each one.
Trim off any large fan leaves and big sugar leaves that protrude out from the buds. Leave behind some of the smaller, sugary leaves. These will still keep the drying process slow and will protect your buds and their crucial trichomes. When the branches have fully dried up and finally snap instead of bend, this is where you trim the rest. Don’t just throw these away! Excess plant matter or “trim” is an excellent way of making edibles, tinctures, and even hash.
Eco Farm Curved Pruning Shear

If you want to make precise cuts without spending too much time, this is a great product to consider. The spring mechanism will allow it to cut smoother while also being able to significantly reduce fatigue. The non-slip grip is also a plus, allowing you to work continuously without easily complaining of discomfort.
To make it great for trimming marijuana, one feature that you will appreciate is the non-stick coating on the blades. More than protecting it from rust and corrosion, this also helps to maintain the sharpness of the blade despite the sticky residue from the buds or leaves.
Eco Farm 16-Inch Leaf Bowl Trimmer

This leaf trimmer can function similar to working with 30 scissors. This spin bowl leaf trimmer can help you get rid of the twigs and leaves separately. Thus, you will be ready to use them for the cannabis oil too.
The ECO Farm bud trimmer ensures smooth and clean cutting. Therefore, you can be relieved that your plant won’t be harmed. It also causes less mess, which ensures easy cleanup.
This trimmer is very convenient and is lightweight.TrimPro Unplugged

The most advanced and efficient power-free trimming unit ever developed, no aspect of the TRIMPRO UNPLUGGED has been overlooked in its design. The size, weight and shape, along with the reversible trimming action, all contribute to its ideal ergonomics. The leather fingers are treated with natural oils to reduce adhesiveness and maintain their suppleness. The stainless steel blades are of the highest possible quality, and of course, blade height is adjustable as with all TRIMPRO products.

Best Cheap LED Grow Lights For Growing Indoor Plants

What Is an LED Grow Light?
L.E.D stand for Light Emitting Diodes (I can’t think of any simple definition for LED, so let’s leave it like that. It won’t hinder us from seeking our target!).

LED grow lights “vary in color” depending on the intended use. But to avoid complexity, I’ll give you this general knowledge: Plants will grow normally if given both red and blue light and provides the most cost-efficient method of growing.

That means you don’t need to find any ultra-high-tech super expensive grow light just to get optimal yields from your plant.

Good cheap LED grow lights will do the rest, though finding the best budget LED grow lights is better, would you agree?

AgroLED Sun 28 T5 LED Grow Light

These environmentally friendly ArgoLED Sun 28 produces over 10,750 lumens and 155.01 PPFD from only 90 watts of consumed power and the Sun 48 produces over 21,900 lumens and 316.806 PPFD from only 187 watts of consumed power.

White powder-coated steel housing is durable with louvers to ensure proper thermal management. V-hangers are included with every fixture that allows for the fixture to hang vertically or horizontally. 8 foot power cord and on/off switch allows for easy operation. Daisy chain feature makes for an ideal installation for multiple fixtures to be plugged together. This 6,500 Kelvin LED fixture is the smart choice for prop and veg cycles of your plants’ life.

Prism Lighting Science Stealth LED Grow Lights

LTC Cool Diamond LED Grow Light

Best 5×10 Grow Tent Reviews | 2020 Guide

If you are looking to grow your own buds, you should invest in a grow tent. A grow tent can be very resourceful as you can customize it with grow lights, especially for hydroponic plants. These come in various sizes, but here we will focus on five feet by ten feet size. A 5×10 grow tent is big and can house a decent amount of plants.

What Is Grow Tent?
You need to control the climate and lighting when you like to grow plants in any place easily and more safely. So, grow tent the answer for this. The name itself pronounces what a grow tent is. When it is an ideal indoor growing space for all your exotic and seasonal plants. It has soft sides, it is light in weight, and it can also carry them easily. Rather, it is much like a grow box for all your indoor plants.

The marijuana grow tents must need to grow fruits, flowers, and vegetables in indoor plants. If you want to start indoor plants, you must need a grow tent. Isn’t that fascinating, when you can grow those exotic kinds of flowers, fruits or the seasonal fruits all year around? Now, is that possible with a grow tent. But you must choose a perfect grow tent for your indoor gardening.

Why are Grow Tents Important for Growing Marijuana?
First off, they ensure that all the light is contained inside the area and is focused on the plants. Thanks to the enclosed nature of the tents and the thick canvas, the light is trapped inside and the only place where the light can be absorbed are the plants because practically everything else would reflect it. This maximizes the efficiency of your grow light as well.

Hydroponic grow tents are an excellent way of keeping your growing discreet. While most growers grow their weed in a separate room, they’d still not grow it out in the open making it obvious for everyone that they are growing weed. These grow tents allow the plants to be kept in an enclosed space where they can be zipped up and won’t really attract attention.

Eco Farm 10*5FT Grow Tent

Eco Farm 10*5FT(120*60*80inch) Grow Tents - Standard Style

With this grow tent you can easily control the lighting and the climate inside the grow tent. The interior of the tent is made out of 97% reflective mylar to maximize the light reflection. The fabric is made out of 600D oxford cloth which is tear proof as well as water proof and long lasting.

Secret Jardin HS300 10ft x 5ft Grow Tent

Secret Jardin HS300 Hydro Shoot 10ft x 5ft x 6.7ft Plants Grow Tent

It’s made of regular 600D mylar fabric, which enhances the reflectiveness of the tent insider body. POn top of that, the exterior is made out of light-proof and heat-proof Oxford cloth. Together, you get a solid built quality and isolation from environmental factors outside.

Conclusion
Getting the right-sized grow tent in Canada is essential if you want to have proper indoor gardening. There are so many different sizes available and to get the appropriate size to get the proper dimensions of your setup. There are also many different models to choose from, but the buying guide discussed in this review can help you get appropriate to grow tent you need.

A Growers Choice: Wet vs Dry Trimming 2020 Updated

Trimming is one of the least appreciated aspects of cannabis; it’s also one of the least understood. The average person may think of trimming as a simple snip job that removes the buds from the stems—but there’s a lot more that goes into it.

There are two typical methods of trimming: wet and dry. If you ask growers which is better, you’ll find a roughly 50/50 split in responses. Each method has its advantages and disadvantages, and you’ll need to decide for yourself which one works best for your business.

Dry trimming
Dry trimming takes at least twice as much time as wet trimming, plus the 10-15 extra days of the drying process. Once dry, you will have to remove the curled leaves surrounding the buds, which can be done with trimming scissors. The process, though, might prove a bit too strenuous.

Accordingly, large-scale producers who dry trim their buds generally invest in professional trimmers. These are electric machines specifically designed for dry trimming that allow growers to get done with their trimming in a matter of hours, instead of days. The only downside here is the price.

Wet trimming
Wet trimming is the normal way to harvest your cannabis plants. You either cut the whole plant down and start removing as much leaf material as possible with fingers/scissors, or trim one branch at a time. This method is preferred by the vast majority of cannabis cultivators worldwide.

The disadvantage of wet trimming is the time it takes. For commercial growers, hired hands will be required for post-harvest processing. This can be costly and a security risk. Home growers may need to wet trim in stages for larger harvests, especially if you favour the ScrOG method. 2-3 days of trimming solo by hand is hard graft.

Dry Trim Vs. Wet Trim: Final Verdict

You should dry trim if…
the quality of the bud is more important than anything else
you are not able to get through all the trimming in one day
you need to move your harvest off-site as quickly as possible

You should wet trim if…

you want to get trimming done quickly (to save on labor costs, for example)
you have limited drying space
you are in an especially humid climate

Cheap Bowl Bud Trimmer Machines

Eco Farm Leaf Bowl Trimmer

ipower leaf-bowl trimmer for cannabis buds

The leaf bowl trimmer is a good non-electric bud trimming machine, at an affordable price that can save you 80% of trimming time. This manual operation unit comes with two adjustable blades, the wire blade is for dry buds and the flat blade is better for wet buds.
How it trims buds: The rubber fingers tumble buds while the blade trims the bud leaf that passes through the metal grate. Simply remove the top, place untrimmed buds on the grate, close it and rotate the handle clockwise for about 15-30 seconds. Remove the top again to reveal the trimmed buds. Leaf is caught in the lower section of the machine. Simple & easy to clean.
Trimpro Unplugged

The Trimpro Unplugged is a hand-operated bud trimmer machine. The machine is designed for instances where noisy power tools are not applicable. You might want to tend to the flowers in your apartment. The Trimpro Unplugged is a great option so that you do not inconvenience other residents of the apartment with noise.

Risentek Bud Leaf Trimmer Machine

This cannabis trimmer can be used for both dry and wet trimming. Ti quickly gets rid of excess twigs and leaves from multiple types of plants and flowers – it can be used for making essential oils and potpourris, too. A 16-inch trimmer, it is long lasting with a metal gearbox and center grate with a 5/16” slot for all sizes of flowers.

What size tent do I need for 4 plants?

What Determines Tent Size Per Plant?
Your planting techniques determine the number of plants to be planted in a particular tent size. Majorly, factors such as lighting conditions, plant growth style, size and shape of your planting containers, and yield expectations determine how many plants you can plant in a marijuana grow tent of a particular size.

However, among these factors, plant training style is the most important factor that determines the number of plants per a certain size of a tent.

Size
If you only plan on growing 2-3 plants at a time, you can choose a tent that’s about 4×4 grow tent. A good rule of thumb is to make sure to have 1 square foot of space per plant within the grow box. This will make sure that your plants have enough space to grow to their full capacity.

So, if you want to grow 4 plants to full maturity, you’ll want to have at least 5 feet by 5 feet of space. The increase in space is necessary for the light to hit throughout your plants, so you don’t miss out on optimal growth.

Grow Tent Height
Most grow tents that you look at will be between 4 -7 foot in height.

If left to their own devices, cannabis plants can grow much taller than this.

Therefore, it’s important that you perfom some basic training techniques to ensure that you’re plant will not grow too tall.

The Best Grow Tents For Weed

Eco Farm 2-in-1 Indoor Grow Tent

The durable tent material (Oxford fabric: 600D) is reinforced with durable zippers and a large zipper door, allowing you to easily set up your growing equipment. There are multiple intake and exhaust ports that let you install inline duct fans, filters, ductwork and electrical appliances so you can control the humidity and temperature with ease.

A sturdy metal frame ensures your tent won’t collapse. Meanwhile, 4 metal rings allow you to secure your lighting.

Quictent Grow Tent

Quictent 2ft x 4ft x 7ft Mylar Hydroponic Grow Tent For Plants Indoors

The tent has been approved for SGS testing and certification, which means that several elements comply with the use of this tent. No matter what you are growing, you can use this tent. It is practically light proof; while it says it is 100% light proof, it is more like 90% lightproof, but with some simple tweaking you could make this tent into a completely light proof tent.

What is the difference between LED and COB LED Grow Light?

WHAT IS COB (CHIP ON BOARD)?
A Chip On Board LED Downlight consists of a single LED chip, mounted on the downlight, compared to an array of LED’s like an SMD. As the single cluster of LED’s are mounted in one point, they require greater cooling, so a larger heat sink, usually made of aluminium, must be mounted to dissipate the heat. As more material is required to manufacture a COB LED heat sink, this usually increases the cost slightly.

The Advantage of COB LED Grow Lights
So what is exactly is Chip-on-Board technology? The most notable design advantage of COB packaging is its ability to accommodate nine or more LED diodes on a single chip. LED diodes are bonded directly onto a ceramic, aluminum, or copper substrate to form an array on a single module. When a COB LED grow light is turned on, these diodes emit a controlled light beam with no visible individual light points. Because these lights can pack more chips into the light-emitting area, COB LED lighting maximizes the lumen output per inch and provides a denser array of light vs. other lighting options.

COB is known for better lumen per watt ratios and heat efficiency. COB chips can produce a higher amount of lumens with less energy with a minimum of 80 lumens per watt. You can find it in all types of bulbs and applications, like the flash of your mobile phone or point-and-shoot camera.

Light density increases significantly as there are more diodes packed together in a tight space. And because these many diodes function as one large LED chip, they generate a greater intensity of light that penetrates deeper into the canopy. COB technology also boasts a higher color rendering index, which means human eyes perceive objects under the glow of a COB LED grow light as their natural color. Without the purple glow associated with SMD LED lights, growers have an easier time identifying discoloration that could indicate a fungal attack, light burn, or any other threat to plant health.

Best COB LED Grow Lights for Sale 2020

SunStream 600W COB LED Grow Light

The light is good for plants in both the vegetative and flowering phases. This is one of the latest trends of using cob led lights for growing marijuana and weed indoors.

This lighting lamp has the same high intensity spectrum that you find in HPS bulbs. The cob led lights nicely combine the high PAR output to offer red and blue rays.

This feature allows plant growth during all stages of plantation. It is equipped with various full spectrum led grow lights that has large 90-degree glass lenses, providing high light output efficiency.

Optic 4 Gen4 Dimmable COB LED Grow Light

The Optic 4 Gen4 is more efficient than ever! It uses less power to deliver even more light and will deliver yields of up to 888 grams / 31.71 oz / 1.98 lbs.

6 CREE Xlamp CXB3590 COB LED Chips

Bloom Enhancers:

– CREE XPE 660nm Deep Red and 460nm Royal Blue Bloom Enhancers.

– Samsung Horticulture specific LM301H Mixed White LEDs

Yield: up to 3.0lbs / up to 2.4 grams per watt

Will a 315w CMH produce bigger better buds than an LED using the same watts?

Over the past twenty years, grow lights have evolved. We have an array of modern light systems that can grow plants, like Ceramic Metal Halides (CMH) and Light Emitting Diode (LED) systems.

There are a lot of nuanced differences between the two light systems, and I’m going over as much as I can in this quick overview. We’re going to cover light spectrum, canopy penetration, cultivation size, environmental control, investment cost, and budget.

For growers who are looking to harvest ½ half to one ounce of cannabis each month, LEDs may be your best choice. At this size, LEDs are energy efficient, run cool, and need little to almost no setup! They get better yields than fluorescents, but don’t run as hot as an HPS of similar wattage.

With no heat output, it is easier to deal with, and you don’t need to purchase extra equipment for ventilation/cooling.
Have built-in cooling that pushes heat up and away from the plants. It is an easy set up, as the smaller sized LEDs simply need to be plugged into the wall and hung up over your plant.
Some growers believe LEDs produce more resinous bud. Combining LEDs with HPS grow lights has produced great results for some growers, though more testing is needed.

CMH fixtures put off quite a bit less heat than HPS grow light, but still produce heat. You are going to want to place them higher than you would with LED. Recommended height is 24 inches from the canopy of your plants to avoid bleaching or burning your leaf’s. CMH grow lights are not air-cooled and will direct heat generated down towards the plant canopy. Proper ventilation and airflow are one of the most important parts of a successful grow, regardless of which lighting you choose. Oscillating fans and intake/exhaust fans are highly recommended.
On the other hand, if you are restricted in your height, LEDs can be placed much closer to your canopy. The recommended distance is 12-18 inches from your canopy. The back end of the diodes produce heat through a heatsink. The heat sink hits the aluminum reflector of the fixture to help disperse the heat over a larger area.LED grow lights are budding with newfound popularity because growers are learning to manipulate the LED light spectrum. Growers can now create custom-designed spectrums with LED that use the ideal ratio of blue to red light needed to yield lush and potent marijuana flowers. And when growers can control the light spectrum, they can grow better plants with less energy.
LED lights also offer better overhead heat coverage for indoor growth. Growers need an even canopy to grow marijuana properly, and LED reduces the risk of hot spots and dead zones in the cannabis canopy.
Through it all, though, there’s still one factor that seems to stand out from them all: cost. LED’s are great at getting your plants where they need to be, but the problem is they’re expensive.
CMH’s, on the other hand, is far more cost-effective than LED’s. Sure, you may have to combat heat eventually, but compared to the output of an HPS or MH grow light, you’ll still be saving money on in the long run compared to other lights on the market. At the end of the day, you’re going to have to spend money on a grow light. CMH’s are better priced for personal grows as well as warehouses, and everything in between.
Eco Farm 200W LED Grow Light

Eco Farm 200W/400W/600W/800W LED Grow Light

The light features a best lens to increase light performance and this helps plants grow faster and stronger. The light has full spectrum can grow from seeding and young growth to the blooming stage. The light provides big coverage area. The unit is well built and easy to use and comes with full instructions and a 3-year warranty. It is also quiet and cool in use.SunPlix 630W Double Ended CMH Grow Light

SunPlix 630W Double Ended CMH Grow Light Fixture

Each ballast includes state of the art technology that provides a soft start feature. This feature reduces the wear and tear on grow light bulbs and increases their life span. In addition, the built-in ballast also enables the fixture to produce extremely high PAR levels which is excellent for improving flower growth and size.

Which way to go? HPS Grow Light or LED Grow Light?

The question of LED vs HPS and which is “better” has been around since the LED grow light hit the market. While LED grow lights have certainly come a tremendous way since, can they compete, watt for watt, with the HPS grow light? And where do other types of HPS grow lights come into play?
Advantages of LEDs over HPS

LED diodes are very electrically efficient, which could save you money over time (though the jury is still out when it comes to whether LEDs get better yields than HPS watt-for-watt). Additionally, where an HPS bulb needs to be replaced every few grows to maintain its brightness, individual LED diodes keep their brightness practically forever. With an LED grow light, it’s almost certain something else will break on the lamp before any diodes start losing their brightness.

LED grow lights last six times as long!
Eco-friendly LED grow lighting uses no toxic metals.
Energy savings range from 50%-70% over HID lights.
No cooling necessary; no plant burn and decreased risk of fires.
LED directional lighting requires no reflectors.
Maximum chlorophyll absorption and flower production.
Less frequent watering.
Discretion assured — no thermal footprint.

HPS Grow Lights
Advantages of HPS Grow Lights

HPS grow lights are capable of producing an intense amount of light, which can increase cannabis flowering.
There are a wide variety of HPS grow lights available, so options have become more standardized.
The initial start-up costs are lower with HPS grow lights than LED lights.

Drawbacks of HPS Grow Lights

HPS grow lights require more power and are less energy efficient than LED lights.
HPS grow lights have a shorter shelf life in comparison to LED lights.
The intense lighting of HPS makes adequate airflow and ventilation essential.
Setting the optimal temperature can be challenging, particularly in confined spaces.
HPS grow lights increase costs substantially in the long-term

Best Grow Lights for Sale
SunStream 250W Broad Spectrum LED Grow Light

SUNSTREAM is available in different spectra and with two beam angle options (60°or 90° to suit various crop types). Slim design for minimized shading. A dimmable function is optional to further adapt to plant growth stages.
Phlizon 600W Dimmable LED Grow Light

Phlizon 600W Dimmable Plant LED Grow Light Full Spectrum Grow Light

Over 90% high reflective aluminum ensures soonest flourish of your plants, light efficacy is up to 3.2umol/W, light output PPFD value is 327 umol/m² hanging at 18″.High reflectivity aluminum hood boosts reflectivity by 20% compared to standard aluminum reflectors
We did lots of experiments to ensure that this full spectrum promotes plant growth. It includes universal blue red IR UV and white leds which can provide everything plant desired in the natural sunlight. The IR and UV leds can promote plants to defense mechanisms, blue and red led is essential light for plant growth.

Will CMH Grow Light Produce Better Quality Buds than COB LED Grow Light?

What is CMH Grow Light?
The crux of the matter; what are LEC lights and why are they sometimes called ceramic metal halide (CMH) or ceramic discharge metal halide (CDM)? Thankfully, all terms mean the same thing, and as awareness of the technology increases, these terms are becoming interchangeable. An LEC light uses a ceramic arc tube, rather than the quartz version found in regular MH lights. The result is a more natural colour, producing more lumens per watt and lasting a lot longer. The most common model of LEC fixture is the 315W with a “4200K” colour bulb.

What is a COB LED?
A COB (short for Chip-on-Board), is an LED packaging technology that describes mounting multiple LED chips directly onto a substrate to form a single module. Multiple LEDs, minuscule in size, are wired and packaged together into a single ceramic or copper board so that they function as a sole light source.

When a COB LED grow light is energized, it appears more like a lighting panel than multiple individual lights as usually the case with other LED packages, like when using several SMD LEDs mounted closely together.

Pros of CMH Grow Lights

LECs last on average twice as long as MH or HPS bulbs.
LECs, because of the ceramic element, burn much hotter than MH, producing a light closer to that of natural sunlight. Due to their insulating value though, they also have a lower heat output, which means there is less likelihood of burning plant leaves as compared to MH or HPS bulbs.
LECs can produce light spectrum sufficient to support both the vegetative stage of plant growth as well as its flowering stage.

Cons of CMH Grow Lights

Heat Generation: I know this is also listed as an advantage above. Quality CMH grow lights emit much less heat than HPS or MH, but still more than LED.
Flowering: CMH grow lights are very good at flowering, especially those with a warmer color spectrum (around 3000K), like the Philips 3100K bulb we recommend.

Pros of COB LED lights

These lights have more number of diodes as compare to SMD lights. Hence from a small amount of energy or watt it generates higher amount of energy.
Since these lights can produce higher amount of light from smaller space, these lights are efficiently used in flash lights of a camera or mobile phone
These lights generate higher lumen lights in less watt. Also, the heat generation is very less as compared to other lights. This aspect makes it very appropriate for indoor plantation as it would not require separate cooling agents.

Cons of COB LED lights

These lights do not emit different colours as compared to SMD lights. It output comes in a single colour. Hence, chip on board LED lights cannot be used as colour changing bulbs like SMD lights.

Best Grow Lights for Weed for Sale 2020
Optic 4 Gen4 Dimmable COB LED Grow Light

Optic 4 Gen4 Dimmable COB LED Grow Light 370W (UV/IR) 3000K & 5000K COBs

The New Commercial Grade Optic 4 Generation 3 COB LED Grow Light has now hit the market. Optic 4 now features CREE’s newest XLAMP CXB Series COBs with 33% higher Efficacy on the same Light Emitting surface. The Full cycle Optic 4 can be utilized from Seed to harvest as it packs a mix of warm white and cool white COBs.
Focus iLink 315w CDM Lighting System

Focus iLink 315w CDM Lighting System with Phillips Lamp

Details 315w CDM Horizon Lighting System with Phillips Lamp Product Details: The 315w CDM Horizon Lighting System features the Horizon wide Angle Reflector which provides excellent light output, diffusion and uniform. Made from high quality aluminium which is design around the lamp to provide high PAR levels over wider area evenly.
315W Maxibright CDM iLink Controllable Ballast Maxibright 315w CDM iLink Ballast are a new controllable ballast which offers you the ability to control up to 256 iLink CDM Systems – when using one Revolution RLC-1 lighting controller.

What size parchment paper is best for the nugsmasher mini?

The NugSmasher is manufactured in Corona, CA by Premiere Manufacturing in our 40k square foot machine and fabrication workshop staffed with experienced engineers, fabricators, designers and builders.

The NugSmasher Mini Rosin Press is the smallest rosin extraction system in the Nugsmasher line and is perfect for casual home use. It can process up to 3.5 grams of material at one time.

True to its name, the Mini is only 14 inches tall and 7 inches wide, so you can keep it on a countertop, etc., without taking up too much space. Despite that, It delivers a full 2 tons of pressure through its 2.5 inch aircraft-grade aluminum pressing plates.

The Nugsmasher requires multiple power circuits to run properly (this is all internal, so nothing you need to do except just turn it on). Using a primary power circuit and 3 sub-circuits and routing them all through high quality circuit breakers ensures the safest possible operation.

The circuit breakers are mounted on the front panel for easy monitoring and access. They are simple to reset, so even if the worst happens, you never need to halt operation for long.

NugSmasher recommends using their extraction bags for optimal yield. Like the press itself, the NugSmasher Extraction Rosin Bags are made in the U.S. They’re designed to work with the weight of fresh flower, and they come in a range of sizes:

5g – Yields 1.5”-1.6” puck
7g – Yields 2”-2.2” puck
14g – Yields 2.4”-2.7” puck

NugSmasher Mini Rosin Press

NugSmasher Mini Features:

2 Tons of Pressure
Press up to 3.5 Grams of Material Per Press
Made from Extremely Rugged Solid Steel
Large 2.5″ Aircraft Grade Aluminum Smash Plates
2x 70W Heating Elements that heat up fast and stay hot
Temperature Control with Pinpoint Accuracy
Circuit Protection for Added Safety
Safe & Fast Smash Plate Release Lever
Manual Pump Lever
Made Entirely in the United States of America
Full Manufacturer Backed Lifetime Warranty